#MAKE YOUR OWN AUTOMATIC CHICKEN DOOR HOW TO#

you have to make sure that the bolt always remains in its place and for that, you can use some drill collars. Step 8: Now, you have to attach the door to the antenna and for that, you need to drill a hole in the bolt and thread it to the antenna. Now, cut a piece of plywood that fits the gap perfectly and slip the door between these C Channels and make sure that it moves smoothly from up and down. Step 7: Now, you have to make the door, for that, you have to measure the distance between C Channels and the height from the ground to whatever length you want to build the door. You have to be very careful while doing this because any mistake will lead to destroying the antenna. Then, if you find the antenna too long, cut it according to your own length. You have to use bolts and nuts to mount the antenna to the coop. Step 6: After attaching all the wires, the time has come to attach the antenna to the coop. Now, attach all the remaining wires from the antenna to the timer. Finally, attach the board to the wooden antenna bracket. Attach the timer into it and drill two holes on the top where you have attached the timer for passing the wires. You will need a piece of wood, the same size as the one you have mounted the antenna to. Step 5: Now, it’s come to attaching the wires. Use the drill to take out extra holes for wiring, so that the setup looks clean. Now, bolt the antenna perfectly into the place. Finalize, where you want to place the antenna and then fix it using screws and tape. For that, you will have to attach a wooden bracket to another piece of wood. Step 4: Now, you have to mount the Antenna.

Now, attach the C Channel to the Coop and make sure that while attaching the C Channel, the distance must be the same from top to bottom, otherwise, it will jam. You have to make sure that the wood is as straight as possible. For this, you have to cut two equal lengths of wood and attach your C Channel into it using screws.

Step 3: Now, you have to create a C Channel for your door, it will help in keeping the door in the right position. Once you have decided where to place the door, then you have to design the working of the door. There are many different types of coops available and you have to be careful while placing the door. Step 2: Then, you have to plan the structure of the door. If everything works correctly, then the timer available on the antenna starts to retract. You can either use a 12V battery or any power source that has constant power to check the antenna. Step 1: Firstly, you have to test the Antenna and timer and make sure that everything works perfectly.

Step by Step Guide for Building an Automatic Chicken Coop Door We have discussed a detailed and step-by-step guide which you can use to create the Door.

#MAKE YOUR OWN AUTOMATIC CHICKEN DOOR HOW TO#

In this guide, we will discuss how to build your own DIY Chicken Coop Door opener. So, most people come up with different DIY chicken coop door ideas which are less expensive when compared to Automatic Chicken Coop Door. There are various Automatic Chicken Coop Door openers available in the market but they are a bit expensive. Without the help of a chicken door, the users have to manually open the gates to let the chicken out. The Automatic Chicken Door is one of the best gadgets right now for those people who pet chickens.

Make your own automatic chicken door